Publication list

Technical papers have been published by staffs (including former staffs) of Analytical Research Core for Advanced Materials (ARCAM).

2022

K. Nakayama: "Precise Quantification of Tungsten in Tool Steel Samples by Simultaneous Measurement of Vanadium Internal Standard in Continuum-light-source Flame Atomic Absorption Spectrometry", ISIJ International, 62 (2022) 849-853.   https://doi.org/10.2355/isijinternational.ISIJINT-2021-360
K. Nakayama: "Selecting an Acid Mixture for Microwave Digestion of Diverse Steel Samples in Inductively Coupled Plasma Atomic Emission Spectrometric Analysis of Boron, Aluminum, Silicon, Phosphorous, and Alloyed Elements", ISIJ International, 62 (2022) 1023-1026.   https://doi.org/10.2355/isijinternational.ISIJINT-2021-391

2021

K. Nakayama and K. Wagatsuma: "Oxidative Quaternary Acidic Mixture on Microwave-assisted Digestion for High-Carbon Iron Samples", ISIJ International, 61 (2021) 2181-2184.   https://doi.org/10.2355/isijinternational.ISIJINT-2020-716
K. Nakayama and K. Wagatsuma: "Multicomponent Internal Standard Methods for Determination of Vanadium, Chromium, Nickel, and Copper in Tool Steel Samples in Continuum-light-source Flame Atomic Absorption Spectrometry", ISIJ International, 61 (2021) 2122-2126.   https://doi.org/10.2355/isijinternational.ISIJINT-2020-732

2020

K. Nakayama and K. Wagatsuma: "Borate Fusion Preparation of High-speed Steel for Determination of Vanadium by Flame Atomic Absorption Spectrometry with a Continuum-light-source Spectrometer System", ISIJ International, 60 (2020) 812-814 https://doi.org/10.2355/isijinternational.ISIJINT-2019-601
K. Nakayama and K. Wagatsuma: "Absorption-free calibration on X-ray fluorescence analysis of high-speed steel with glass bead preparation", X-Ray Spectrometry, 49 (2020) 332-337 https://doi.org/10.1002/xrs.3134
K. Nakayama and K. Wagatsuma: "Application of Quaternary Acid Mixture to Microwave Digestion Effective for Various Kinds of Steel Samples", ISIJ International, 60 (2020) 193-195  https://doi.org/10.2355/isijinternational.ISIJINT-2019-393
K. Nakayama and K. Wagatsuma: "Development of an Iron Internal Standard Method Using a Molecular Beam of Phosphorus Oxide for Determination of Nickel in Steel Samples by Continuous Source Flame Atomic Absorption Spectrometry", Bunseki Kagaku, 69 (2020) 219-223 (in Japanese with English abstract). https://doi.org/10.2116/bunsekikagaku.69.219

2019

―

2018

S. Semboshi, M. Ishikuro, A. Iwase, T. Takasugi: "Microstructural Subsequence and Phase Equilibria in an Age-Hardenable Cu-Ni-Si Alloy", Materials Transactions, 59 (2018) 182-187 https://doi.org/10.2320/matertrans.MC201706
T. Chiba, K. Wagatsuma, K. Takada, K. Abiko: "Correspondence Between the Analytical Values of Oxygen and the Surface Area of Steel Samples in Inert Gas Fusion - Infrared Absorption Spectrometry to Determine the Amount of Sulfure-absorbed and Surface-reacted Oxygen", Tetsu-to-Hagane, 104, (2018) 61-63 (in Japanese with English abstract) https://doi.org/10.2355/tetsutohagane.TETSU-2017-056
K. Nakayama and K. Wagatsuma: "Sample Pre-treatment of Blast Furnace Slag by Glass Bead Preparation for ICP-AES Analysis", Bunseki Kagaku, 67 (2018) 673-679 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.67.673

2017

Y. Toya, T. Itagaki, K. Wagatsuma: "Application of Internal Standard Method for Several 3d-Tansition Metallic Elements in Flame Atomic Absorption Spectrometry Using a Multi-wavelength High-resolution Spectrometer", Analytical Sciences, 33 (2017) 217-222 https://doi.org/10.2116/analsci.33.217
T. Itagaki, T. Ashino, and K. Wagatsuma: "Selection of Iron Absorption Lines for Sequential Internal Standard Method for Accurate Determination of Nickel in Steel Samples by Flame Atomic Absorption Spectrometry Using a High-resolution Continuum-light-source Apparatus", Bunseki Kagaku, 66, (2017) 515-520 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.66.515
K. Nakayama and K. Wagatsuma: Glass Bead Sample Preparation for XRF in Encyclopedia of Analytical Chemistry (Ed: R. A. Meyers), John Wiley & Sons, Ltd., Chichester, UK (2017), pp. 1-19 https://doi.org/10.1002/9780470027318.a9632

2016

Y.Toya, T. Itagaki, K.Wagatsuma: "Correlation between the Gas Temperature and the Atomization Behavior of Analyte Elements in Flame Atomic Absorption Spectrometry Estimated with a Continuum-light-source Spectrometer System", Spectrochimica Acta Part B, 125 (2016) 146-151 https://doi.org/10.1016/j.sab.2016.10.005
K. Nakayama and K. Wagatsuma: "A New Sample Preparation Method Using Borate Fusion for X-ray Fluorescence Analysis of Vanadium, Chromium, Cobalt, Molybdenum, and Tungsten in High-speed Steel", ISIJ International, 56 (2016) 2330-2332 https://doi.org/10.2355/isijinternational.ISIJINT-2016-435
K. Nakayama and K. Wagatsuma: "Rapid Borate Pre-treatment for ICP-AES Determination of Tungsten in High-speed Steel", ISIJ International, 56 (2016) 1114-1116 https://doi.org/10.2355/isijinternational.ISIJINT-2015-648

2015

F. Sakamoto, T. Ashino and K. Wagatsuma: "Determination of Trace Amounts of Nickel in Cobalt-Chromium-Molybdenum Alloys by ICP-AES after Liquid-liquid Extraction", Bunseki Kagaku, 64 (2015) 689-693 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.64.689
T. Itagaki, T. Ashino, K. Takada and , K. Wagatsuma: "A Simultaneous Internal Standard Method for Improving the Analytical Precision of Flame Atomic Absorption Spectrometry Using High-resolution Continuum-light-soure Apparatus", Bunseki Kagaku, 64 (2015) 117-124 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.64.117
K. Nakayama and K. Wagatsuma: "Weight-based Synthesized Standards Preparation for Correction-free Calibration in X-ray Fluorescence Determination of Tungsten in High-speed Steel", Analytical Sciences, 31 (2015) 851-854 https://doi.org/10.2116/analsci.31.851

2014

S.Semboshi, S. Sato, M. Ishikuro, K. Wagatsuma, A. Iwase, T. Takasugi : "Investigation of Precipitation Behavior in Age-Hardenable Cu-Ti Alloys by an Extraction-Based Approach", Metallurgical and Materials Transactions A, 45A (2014) 3401-3411 https://doi.org/10.1007/s11661-014-2293-2
H. Shimada, T. Ashino, and K. Wagatsuma: "Modification of an Analytical Appratus in Helium Carrier Fusion-Thermal Conductivity Method for Reducing the Quantification Errors of Nitrogen in Oxide Samples", Bunseki Kagaku, 63 (2014) 939-942 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.63.939
K. Nakayama and T. Nakamura: X-Ray Fluorescence Spectroscopy for Geochemistry in Treatise on Geochemistry 2nd Edition (Ed: K. K. Turekian and H. D. Holland), Elsevier Ltd., Oxford, UK (2014), Vol. 15, Chap. 10, pp. 181-194 https://doi.org/10.1016/B978-0-08-095975-7.01413-3

2013

S. Sato, K. Wagatsuma, M. Ishikuro, E. P. Kwon, H. Tashiro and S. Suzuki : "Precise Characterization of Dislocations and Cementite in Pearlitic Steels at Different DrawingStrains Using X-ray Diffraction", ISIJ International, 53 (2013) 673-679 https://doi.org/10.2355/isijinternational.53.673
S. Semboshi, M. Ishikuro, S. Sato, K. Wagatsuma, T. Takasugi: "Extraction of precipitates from age-hardenable Cu–Ti alloys", Materials Characterization, 82 (2013) 23-31 https://doi.org/10.1016/j.matchar.2013.04.016

2012

C. Abe and K. Wagatsuma: "Determination of Ni in Fe-based Alloys using Low Pressure Laser-Induced Argon Plasma Emission Spectrometry", Tetsu-to-Hagane, 98 (2012) 63-68 (in Japanese with English abstract) https://doi.org/10.2355/tetsutohagane.98.63
T. Ashino, H. Shimabukuro, and K. Wagatsuma: "Degradation Process of Graphite Furnace Estimated from Atomic Gas Temperature of Iron in Graphite Furnace Atomic Absorption Spectrometry", Journal of the Japan Institute of Metals and Materials, 76 (2012) 129-133 (in Japanese with English abstract) https://doi.org/10.2320/jinstmet.76.129

2011

S. Morimoto, T. Ashino and K. Wagatsuma: "Measuring Conditions for the Determination of Lead in Iron-Matrix Samples Using Graphite Furnace Atomizers with/without a Platform in Graphite Furnace Atomic Absorption Spectrometry", American Journal of Analytical Chemistry, 2 (2011) 710-717 https://doi.org/10.4236/ajac.2011.26081
I. Seki, K. Nagata, T. Ashino and J. Tanabe: "Solubility of Calcium and Oxygen in Molten Iron Equilibrated with Slag in CaO, Al₂O₃ or CaO-stabilized ZrO₂ Crucible at 1873 K", ISIJ International, 51 (2011) 1369-1374 https://doi.org/10.2355/isijinternational.51.1369
Y. Sato, H. Nishizaka, K. Motomiya, G. Yamamoto, A. Okubo, H. Kimura, M. Ishikuro, K. Wagatsuma, T. Hashida and K. Tohji: "Boron-Assisted Transformation to Rod-Like Graphitic Carbons from Multi-Walled Carbon Nanotubes in Boron-Mixed Multi-Walled Carbon Nanotube Solids", ACS Applied Materials & Interfaces, 3 (2011) 2431-2439 https://doi.org/10.1021/am200335n
Y. Sasaki, H. Shimada and K. Wagatsuma: "Metallurgical Consideration on the Calibration Curve for Binary Alloy Samples in Low-pressure Argon Laser-induced Plasma Spectrometry", Analytical Sciences, 27 (2011) 453-456 https://doi.org/10.2116/analsci.27.453
M. Ishikuro, Y. Sato, K. Tohji, and K. Wagatsuma: "Chemical Speciation Analysis for Amorphous Boron and Precipitated Boron Carbide in Sintered Boron-Added Carbon Nanotubes", Bunseki Kagaku, 60 (2011) 807-811 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.60.807
T. Ashino, K. Tozawa, and K. Wagatsuma: "Suppression of Contamination for Trace Analysis of Silicon by Molybdosilicate Blue Spectrophotometry after Silicon Tracefluoride Separation", Bunseki Kagaku, 60 (2011) 175-178 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.60.175
H. Shimada and K. Wagatsuma: "Emission Characteristics of Iron-Chromium Alloys in Laser-induced Plasma Optical Emission Spectrometry", Bunseki Kagaku, 60 (2011) 59-66 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.60.59

2010

T. Ashino, H. Shimabukuro and K. Wagatsuma: "Degradation Process of Graphite Furnace Estimated from the Atomic Gas Temperature of Iron in Graphite Furnace Atomic Absorption Spectrometry", Materials Transactions, 51 (2010) 2215-2219 https://doi.org/10.2320/matertrans.M2010180
T. Ashino, S. Morimoto, K. Wagatsuma: "Comparative Measurement of Gas Temperature in a Graphite Atomizer by a Two-line Method of Iron and Nickel Spectral Lines in Graphite Furnace Atomic Absorption Spectrometry", Analytical Sciences, 26 (2010) 1301-1304 https://doi.org/10.2116/analsci.26.1301
M. Ishikuro and K. Wagatsuma: "Separation and Determination of Zirconium Carbide in Zr₅₀Al₁₀Ni₅Cu₃₀ Bulk Metallic Glass Matrix Composites Containing ZrC Particles", Materials Transactions, 51 (2010) 366-370 https://doi.org/10.2320/matertrans.M2009334
M. Ishikuro and K. Wagatsuma: "Separation and Determination of Zirconium Carbide in Zr50Al10Ni5Cu30 Bulk Metallic Glass Matrix Composites Containing ZrC Particles", Journal of the Japan Institute of Metals and Materials, 74 (2010) 766-770 (in Japanese with English abstract) https://doi.org/10.2320/jinstmet.74.766
T. Itagaki, T. Ashino, K. Takada, and K. Wagatsuma: "Determination of Trace Amounts of Arsenic, Bismuth, Antimony and Tin in Low Alloy Steel by Inductively Coupled Plasma Optical Emission Spectrometry after Separation by Co-Precipitation with Manganese(IV) Oxide", Bunseki Kagaku, 59 (2010) 43-50 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.59.43
S. Morimoto, T. Ashino, and K. Wagatsuma: "Role of a Binary Metallic Modifier in the Determination of Cadmium in Graphite Furnace Atomic Absorption Spectrometry", Analytical Sciences, 26 (2010) 809-813 https://doi.org/10.2116/analsci.26.809

2009

T. Ashino, H. Shimabukuro, S. Morimoto and K. Wagatsuma: "Temporal Variation in Gas Temperature at the Atomization Stage in Several Types of Graphite Furnaces for Atomic Absorption Spectrometry", Analytical Sciences, 25 (2009) 1261-1264 https://doi.org/10.2116/analsci.25.1261
C. Abe, F. Sakamoto, N. Ohtsu, T. Ashino and K. Wagatsuma: "Quantitative Evaluation of Calcium Phosphate on Surface of Titanium by X-ray Fluorescence Analysis", Materials Transactions, 50 (2009) 2297-2301 https://doi.org/10.2320/matertrans.M2009158
Y. Zenitani, F. Sakamoto and K. Wagatsuma: "Depth Profiling of Metallic Coatings Evaluated from Spatially-resolved Measurement in Glow Discharge Optical Emission Spectrometry", Analytical Sciences, 25 (2009), 323-326 https://doi.org/10.2116/analsci.25.323
M. Ishikuro, T. Itagaki, and K. Wagatsuma: "Influence of Dissolution Acid on Emission Intensity in Inductively Coupled Plasma-Optical Emission Spectrometry with Hydrofluoric Acid-Proof Torch", Bunseki Kagaku, 58 (2009) 833-838 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.58.833
M. Ishikuro and K. Wagatsuma: "Determination of Trace Amounts of Boron in Silicon and Germanium by Curcumin Spectrophotometry after Methyl Borate Distillation", Bunseki Kagaku, 58 (2009) 373-377 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.58.373
K. Takada and T. Sato: "Dissolution of Platinum Phosphide in a Mixture of Hydrochloric Acid and Nitric Acid after Heating in Concentrated Sulfuric Acid or Melted Sodium Disulfate for Determination of Platinum and Phosphorus", Bunseki Kagaku, 58 (2009) 1-5 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.58.1

2008

H. Shimabukuro, T. Ashino and K. Wagatsuma: "Temporal Variations in Gas Temperature in an Atomization Stage of Cadmium and Tellurium Evaluated by Using the Two-line Method in Graphite Furnace Atomic Absorption Spectrometry", Analytical Sciences, 24 (2008) 1165-1170 https://doi.org/10.2116/analsci.24.1165
N. Ohtsu, C. Abe, T. Ashino, S. Semboshi and K. Wagatsuma: "Calcium-hydroxide slurry processing for bioactive calcium-titanate coating on titanium", Surface and Coatings Technology, 202 (2008) 5110-5115. https://doi.org/10.1016/j.surfcoat.2008.05.035
T. Ashino, N. Ohtsu and K. Wagatsuma: "Trace Analysis of Released Metallic Ions in Static Immersion Test for Characterization of Metallic Biomaterials", Materials Transactions, 49 (2008) 1342-1345 https://doi.org/10.2320/matertrans.MRA2007325
M. Ishikuro and K. Wagatsuma: "Analysis of Metallic Glass Sample Including Niobium, Boron and Silicon by Mcrowave-Assisted Dissolution/Inductively Coupled Plasma-Optical Emission Spectrometry Using Hydrofluoric and Nitric Acids Mixture", Bunseki Kagaku, 57 (2008) 897-900 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.57.897

2007

N. Ohtsu, T. Ashino, K. Takada, H. Kimura and T. Hanawa: "Investigation for analytical procedure for determination of trace metallic ions in simulated body fluids by inductively coupled plasma atomic emission spectrometry (ICP-AES)", Journal of Materials Science Materials in Medicine, 18 (2007) 429-433. https://doi.org/10.1007/s10856-007-2001-5
M. Ishikuro and K. Wagatsuma: "Matrix Effect on Internal Standardization in Inductively Coupled Plasma-Optical Emission Spectrometry", Bunseki Kagaku, 56 (2007) 933-938 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.56.933
K. Takada, T. Ashino, T. Syoji, T. Itagaki, and K. Wagatsuma: "Effect of the Matrix Element on the Determination of Tramp Elements in Iron and Steel by ICP-OES: The Usefulness of the Matrix Removal", Tetsu-to-Hagane, 93 (2007) 190-194 (in Japanese with English abstract) https://doi.org/10.2355/tetsutohagane.93.190
N. Ohtsu, T. Ashino, M. Ishihara, F. Sakamoto, T. Hanawa: "Calcium-phosphate formation on titanium modified with newly developed calcium-hydroxide-slurry treatment", Materials Transactions, 48 (2007) 105-110 https://doi.org/10.2320/matertrans.48.105

2006

M. Ishikuro, Y. Sato, K. Tohji, and K. Wagastuma: "Determination of Metallic Elements in Carbon Nanotubes by Inductively Coupled Plasma-Optical Emission Spectrometry", Bunseki Kagaku, 55 (2006) 117-120 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.55.117

2005

F. Sakamoto, K. Takada, and K. Wagatsuma: "Determination of trace amounts of elements in high-purity iron steels and Cr-Fe alloy by ICP-OES after anion-exchange separation ", Bunseki Kagaku, 54 (2005) 1039-1045 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.54.1039
M. Ishikuro: "Quantitative analysis of Fe-Ga-P-C-B-Si bulk metallic glass by microwave-assisted dissolution/inductively coupled plasma-optical emission spectrometry ", Bunseki Kagaku, 54 (2005) 297-300 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.54.297

2004

N. Ohtsu, T. Ashino, and K. Asami: "Silicon contamination adsorbed on pure titanium plate during soaking test in Hanks' balanced saline solution", Materials Transactions, 45 (2004) 550-553 https://doi.org/10.2320/matertrans.45.550
M. Ishikuro: "Dissolution method for LixKCa2Na2Nb5O16 superconductor compounds in inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 53 (2004) 127-130 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.53.127
K. Makabe, K. Takada, and K. Wagatsuma: "Dissolution procedure for the determination of major and minor elements in La-Sr-Ga-Nb oxide by inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 53 (2004) 49-52 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.53.49
Y. Danzaki and K. Wagatsuma: "Hydrogen H-beta line as an internal standard in inductively coupled plasma optical emission spectrometry", Bunseki Kagaku, 53 (2004) 743-748 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.53.743
Y. Danzaki and K. Wagatsuma: "Dissolution for the analysis of alloys containing boron by inductively coupled plasma optical emission spectrometry", Bunseki Kagaku, 53 (2004) 757-761 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.53.757
Y. Danzaki and K. Wagatsuma: "Determination of Ni-Pd-P alloys by inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 53 (2004) 53-56 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.53.53

2003

T. Itagaki, K. Takada, K. Wagatsuma, and K. Abiko: "Comparison of ICP atomic emission intensities on axial and radial views, and determination of trace amounts of As, Sb and Sn in iron and steel", Tetsu-to-Hagane, 89 (2003) 890-894 (in Japanese with English abstract) https://doi.org/10.2355/tetsutohagane1955.89.9_890
Y. Danzaki and K. Wagatsuma: "Dissolution procedures for several ruthenium alloys in inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 52 (2003) 1047-1052 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.52.1047
Y. Danzaki and K. Wagatsuma: "Dissolution procedures for several vanadium alloys in inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 52 (2003) 955-958 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.52.955
Y. Danzaki and K. Wagatsuma: "Sodium carbonate fusion/alkaline solution method for the determination of Si in SiC by inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 52 (2003) 347-350 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.52.347
Y. Danzaki and K. Wagatsuma: "Dissolution method with HBr-Br2 for the analysis of Mn-Rh alloys by inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 52 (2003) 351-355 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.52.351

2002

K. Takada, T. Ashino, T. Itagaki, Y. Morimoto, K. Wagatsuma, and K. Abiko, "Determination of trace element quantities in ultra high-purity iron by spectrochemical analysis after chemical separation", Materials Transactions, 43 (2002) 105-110 https://doi.org/10.2320/matertrans.43.105
T. Ashino, K. Takada, T. Itagaki, S. Ito, K. Wagatsuma, and K. Abiko: "Chemical form of precipitate by coprecipitation with palladium for separation of trace elements in high-purity metals", Materials Transactions, 43 (2002) 111-115 https://doi.org/10.2320/matertrans.43.111
T. Ashino, K. Takada, Y. Morimoto, and K. Abiko: "Determination of trace amounts of sulfur in high-purity iron by infrared absorption after combustion: Selection and pre-treatment of reaction accelerators", PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 189 (2002) 123-132 https://doi.org/10.1002/1521-396X(200201)189:1<123::AID-PSSA123>3.0.CO;2-9
Y. Danzaki: "Quantitative analysis of several kinds of Ir-Al alloys by ICP-OES", Bunseki Kagaku, 51 (2002) 983-988 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.51.983
Y. Danzaki: "Dissolution with HNO3-HF/ICP-OES for an analysis of Ag-In-Sn alloys and others by using the sequential correction method", Bunseki Kagaku, 51 (2002) 613-617 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.51.613
Y. Danzaki: "Determination of impurities in pure iron, iron alloys and iron oxide by cupferron separation/ICP-OES", Bunseki Kagaku, 51 (2002) 619-623 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.51.619
Y. Danzaki and K. Wagatsuma: "Prevention of Ge volatilization in the chemical treatment of Ge-Cr-Al-Ce-Sm amorphous alloy for the determination of Ge by ICP-AES", Analytical Sciences, 18 (2002) 847-849 https://doi.org/10.2116/analsci.18.847
Y. Danzaki: "Chemical interference by rhodium compounds formed with individual acids in solutions in an inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 51 (2002) 133-139 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.51.133

2001

K. Takada, T. Ashino, and T. Itagaki: "Determination of ultratrace amounts of elements in ultra-high-purity iron, steel, iron-chromium alloy and other alloys by spectrochemical analysis after chemical separation", Bunseki Kagaku, 50 (2001) 383-398 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.50.383
K. Tsuji, Z. Spolnik, and T. Ashino: "New experimental equipment for grazing-exit electron-probe microanalysis", Review of Scientific Instruments, 72 (2001) 3933-3936 https://doi.org/10.1063/1.1405788
Y. Danzaki and T. Ashino: "New convenient dissolution of iron-rhodium alloys using hydrochloric acid containing a small amount of nitric acid without heating for an ICP-AES analysis", Analytical Sciences, 17 (2001) 1011-1013 https://doi.org/10.2116/analsci.17.1011
T. Ashino, K. Takada, M. Oku, and K. Wagastuma: "Studies of sample cleaning for the determination of ultratrace amounts of carbon in high-purity iron by infrared absorption after combustion ", Bunseki Kagaku, 50 (2001) 411-418 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.50.411
Y. Danzaki and K. Wagatsuma: "Effect of acid concentrations on the excitation temperature for vanadium ionic lines in inductively coupled plasma-optical emission spectrometry",  Analytica Chimica Acta, 447 (2001) 171-177 https://doi.org/10.1016/S0003-2670(01)01261-2
Y. Danzaki, K. Wagatsuma, T. Syoji, and K. Yoshimi: "Dissolution of molybdenum-silicon (-boron) alloys using a mixture of sulfuric, nitric and hydrofluoric acids and a sequential correction method for ICP-AES analysis", Fresenius Journal of Analytical Chemistry, 369 (2001) 184-186 https://doi.org/10.1007/s002160000616

2000

T. Itagaki, T. Ashino, and K. Takada: "Determination of trace amounts of gold and silver in high-purity iron and steel by electrothermal atomic absorption spectrometry after reductive coprecipitation", Fresenius Journal of Analytical Chemistry, 368 (2000) 344-349 https://doi.org/10.1007/s002160000455
Y. Danzaki, H. Konno, T. Ashino, K. Tozawa, and M. Takeuchi: "Component analysis of bismuth-system superconductor by inductively coupled plasma-optical emission spectrometry", Bunseki Kagaku, 49 (2000) 709-712 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.49.907
T. Shoji, Y. Danzaki, T. Ashino, H. Konno, and K. Makabe, "Dissolution of antimony alloy, tin alloy and metallic germanium using nitric-hydrochloric-tartaric acids for ICP-OES", Bunseki Kagaku, 49 (2000) 709-712 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.49.709
T. Ashino, K. Takada, Y. Morimoto, H. Yasuhara, M. Kurosaki, and K. Abiko, "Determination of trace amounts of carbon in high-purity iron by infrared absorption after combustion: Pretreatment of reaction accelerator and ceramic crucible", Materials Transactions, 41 (2000) 47-52 https://doi.org/10.2320/matertrans1989.41.47
K. Takada, T. Ashino, Y. Morimoto, H. Yasuhara, M. Kurosaki, and K. Abiko, "Determination of trace amounts of sulfur in high-purity iron by infrared absorption after combustion: Removal of sulfur blank", Materials Transactions, 41 (2000) 53-56 https://doi.org/10.2320/matertrans1989.41.53
I. Takahashi, M. Ishikuro, K. Takada, K. Abiko, and K. Tsunoyama, "Spectrophotometric determination of trace amounts of boron in high-purity iron and ferroalloy after chemical separation",  Materials Transactions, 41 (2000) 57-60 https://doi.org/10.2320/matertrans1989.41.57

1999

M. Ishikuro, K. Se-Hyun, K. Takada, and S. Hanada: "Separation and determination of TiC in in-situ TiC particle reinforced Fe3Al based alloys", Tetsu-to-Hagane, 85 (1999) 155-159 (in Japanese with English abstract) https://doi.org/10.2355/tetsutohagane1955.85.2_155
Y. Danzaki, K. Takada, K. Wagatsuma, and M. Oku: "Mutual interference coefficients obtained for 639 emission lines of 68 elements in routine analysis by ICP-AES", Fresenius Journal of Analytical Chemistry, 364 (1999) 549-550 https://doi.org/10.1007/s002160051383
K. Wagatsuma, Y. Danzaki, and N. Yamashita: "Comparison of emission characteristics for lanthanide elements between in a glow discharge spectrometry and in an ICP spectrometry", Bunseki Kagaku, 48 (1999) 349-363 (in Japanese with English abstract) https://doi.org/10.2116/bunsekikagaku.48.349
K. Wagatsuma and Y. Danzaki: "Non-Boltzmann distribution among energy levels of singly-ionized vanadium in dc glow discharge and rf inductively coupled discharge plasmas", Journal of Analytical Atomic Spectrometry, 14 (1999) 1727-1730 https://doi.org/10.1039/A901072F

1998 (ARCAM established)

K. Takada, M. Ishikuro, K. Tozawa, M. Hosoya, and K. Abiko: "Determination of trace amounts of metalloid elements in high-purity iron by chemical separation-spectrophotometry", PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 167 (1998) 399-404 https://doi.org/10.1002/(SICI)1521-396X(199806)167:2<399::AID-PSSA399>3.0.CO;2-N
K. Takada, Y. Morimoto, K. Yoshioka, Y. Murai, and K. Abiko: "Determination of trace amounts of gaseous elements (C and O) in high-purity iron",  PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 167 (1998) 389-397 https://doi.org/10.1002/(SICI)1521-396X(199806)167:2<389::AID-PSSA389>3.0.CO;2-R
Y. Danzaki, K. Takada, K. Wagatsuma, and M. Oku: "Accurate and rapid estimation on spectral interferences in routine analysis by ICP-AES: use of mutual interference coefficients ", Fresenius Journal of Analytical Chemistry, 361 (1998) 410-418 https://doi.org/10.1007/s002160050916
Y. Danzaki, K. Takada, and K. Wagatsuma: "Cupferron separation for the determination of tantalum in high-purity iron and low alloy steel by ICP-AES", Fresenius Journal of Analytical Chemistry, 362 (1998) 421-423 https://doi.org/10.1007/s002160051098